Altec

The DC912A is a 9-inch-capacity unit with a panic bar system, hydraulic feed system with a capacity of 150 feet per minute and available 48 hp diesel engine.

Bandit

The 990XP drum chipper has a 12-inch capacity, engines up to 86 hp, high-quality steel components and options including reversing auto feed.

CBI

The ChipMax 484 features two chipping rotors and can make fuel chips from 12 to 25 mm or micro-chips from 6 to 12 mm for the pellet-producing market.

Dynamic

The CH310 has a ConeHead drum that is 30 to 40 percent more efficient than traditional drums. It slices material and uses less fuel with less noise and vibration.

Echo Bear Cat

The CH8670H and CH8993H are highway-towable and offer a hydraulic feed system, discs with four reversible chipper blades and bed with 360-degree rotation.

EMB Mfg.

The Wallenstein CR60 features IntelliFeed electronic feed control, which continuously monitors the rotor’s RPM and slows the rollers’ speed as needed.

Fecon

The RTC-22 biomass chipper has a 22-inch capacity, 365 hp engine and quick-attach infeed table. Can be equipped with a tow-behind chip collection wagon.

Hud-Son Forest Equip.

Farmi wood chipper/shredders are reliable and can double as leaf shredders. Hud-Son offers a variety of brush chippers.

JP Carlton

The 660 6-inch disc chipper is an ultra-compact unit with a powerful feed system and 27 hp engine. Can be towed by compact trucks and sport utility vehicles.

The KnifeSource

Mechanical and magnetic knife grinders have a slide pin design to maintain centrality from the bolt mounting holes on double-beveled chipper knives.

MacKissic

Mighty Mac shredder-chippers feature free-swinging, reversible hammers and hardened steel chipping blades. Chip material up to 4.5 inches thick.

Morbark

The Beever M12R has a fully boxed, tubular steel, cross-member frame, Hydra-Lift feed wheel compression system and reversing automatic feed system.

Northeast Implement

Valby disc chippers are available with capacities of 4, 6 and 9 inches, for tractors from 20 to 100 hp, and in self-feeding and hydraulic-feed models.

Peterson

The 4300 drum chipper has an adjustable knife and clamp system, producing chip lengths from 3/8 to 1.5 inches. Powered by a Caterpillar C18 engine.

PowerTek

PowerTek chippers come in gravity-feed and hydraulic-feed models and have a discharge chute that rotates 360 degrees and a 30-inch flywheel.

Precision Husky

The 4042 drum chipper is powered by a 600 hp Cummins or 580 hp Caterpillar engine and can produce more than 75 tons of biomass per hour.

Rayco

The RC1220 has a 2-by-6-inch box tubing frame, planetary drive motor, 20-inch feed wheel, 12-by-20-inch infeed opening and X-Charge discharge system.

Swampy Hollow

The S.H.M. WC3000 is belt-driven and fits Category I three-point hitches. It has a 25-by-18-inch hopper opening and 3-by-5.5-inch chip opening.

USPraxis

The towable wood chipper fits through a standard 36-inch fence and generates mulch particles that work well for planter beds and walking paths.

Vermeer

The BC1000XL comes with two diesel engine options, steel hood, patented SmartFeed System, clutchless PTO system and Bottom Feed Stop Bar.

Woodsman

Chippers are available with diesel engines from 84 to 1,200 hp and use a single, rear-pivoting feed wheel and mechanical leverage in the feed system.

Bandit

The compact model 1680 features a 24-by-52-inch mill opening and can be equipped with engine options up to 325 hp. A tether remote control is standard.

Concept Products

The Shred-All D5600 Wood Series is designed to process and facilitate the recycling of wood waste, including brush, logs, pallets and more.

DuraTech

The 2009 tub grinder offers a 325 hp Caterpillar C9 Tier III diesel engine, self-adjusting clutch with push-button start and self-cleaning air intake system.

Morbark

The 3800 Wood Hog has a 38-by-59.75-inch infeed opening, diesel engine options from 400 to 630 hp and Morbark Integrated Control System.

Rayco

The RH1754 is available as a towable unit or self-propelled model on a steel tracked undercarriage. Both models operate well on small job sites.

Rotochopper

The Rotochopper MP-2 can be towed with a 2-ton truck and offers “perfect in one pass” grinding technology and standard onboard colorizer.

Vermeer

The HG6000E comes in skid and trailer-mount configurations with the SmartGrind feature, duplex drum, reversible hammers and cutter blocks, and remote control.

Advanced Forest Equip.

The mulching attachment comes in four models, with Rotary Disc Mulching technology that transfers power using the carrier’s existing hydraulics.

Alamo Industrial

The BuzzBar has 26-inch blades to slice through material up to 6 inches in diameter. Each blade has 60 teeth that are set and filed.

Ammbusher

The DL-66 features replaceable skid shoes, 66-inch cutting width, front push bar, spring-loaded door with chain curtain, 12-inch blades and direct-drive gear motor.

Bandit

The model 3500 can be equipped with a forestry mower and has high-capacity hydrostatic hydraulic systems, large pumps and oversized hydraulic motors.

Barko Hydraulics

The 305 hp Barko 930 mulcher delivers 270 net hydraulic hp to the mulcher head and offers a maneuverable carrier and low fuel consumption.

Bobcat

The Brushcat rotary cutter handles material up to 3 inches in diameter with double-edged blades and .25-inch thick steel deck design.

Bradco

Brush cutters attach to skid steers, cut up to 4-inch-diameter material and offer high deck clearance, side discharge, flow control baffle and rotation indicator.

Brush Technology

The Seppi Starforst is designed for carriers up to 440 hp, comes in 79, 89 and 98-inch widths and processes trees up to 16 inches in diameter.

CEAttachments

The EDGE Land Clearing Attachment has an in-line planetary gearbox for high torque, piston-type hydraulic motor for efficiency and 52 carbide-tipped teeth.

Denis Cimaf

The DAH-080C mulcher features sharpenable, fixed-knife rotor technology, timing-type drive belt and variable displacement axial piston motor.

Echo

The SRM-410U features a 42.7cc Power Boost engine, 60.2-inch steel shaft, offset U-handle, engine vibration reduction system and 10-inch brush blade.

FAE

The PT-300 can be equipped with a mulching attachment and offers a 275 hp engine, track options and the ability to mulch material up to 14 inches in diameter.

Fecon

Bull Hog mulchers are available with the HDT rotor system, which features improved rotor efficiency and four different tool options.

Hakmet Ltd.

The MERI Crusher can be mounted on different base machines in either the rear or front. It has a built-in safety clutch that protects transmission components.

IronWolf

IronWolf mulcher attachments come in 5, 8 and 10-foot models with a direct-drive design. Maximizes power from the carrier to the cutter head.

Jarraff Industries

The Geo-Boy, with 220 or 260 hp engines, can process material up to 12 inches in diameter and has an ergonomically designed, pressurized cab.

Kershaw

The Klearway 500 has a 202 hp Cat engine, twin-disc rotary mower, interchangeable mulcher/shredder attachments, maximized steering, ROPS and FOPS.

Kut Kwick

The BrushMaster is a zero-turn-radius machine that can remove brush up to 4 inches in diameter and clear land at a rate of about 1.5 acres per hour.

Loftness

The Carbide Cutter G2 cuts and mulches material up to 6 inches in diameter and can intermittently cut material up to 10 inches in diameter or larger.

Peco

The Brush Blazer features a 26 hp, fuel-injected Kohler engine, hydrostatic-driven tracks and double-disc blade system that cuts 4-inch trees.

Rayco

The Predator PM638 mulching head can be attached to the C100 Super Crawler, has 38 fixed teeth and clears a 6-foot swath.

Shindaiwa

The C282 has a 28.9cc engine, 8 mm steel main shaft, four-shoe clutch, anti-vibration system, purge-pump carburetor and electronic ignition system.

Sneller

The brush and tree removal attachment is self-powered, with engines up to 275 hp, and has patented carbide teeth and triple-sealed bearings.

Supertrak

Mulching carriers in the 140 series feature 140 hp, hydraulic flow of 40 GPM at 5,500 PSI, Lexan windshield, auto-reversing fan systems and noise abatement.

Texas Timberjack

The high-speed Tushogg land clearing attachment is equipped with interchangeable teeth and can work in rocky conditions and wet areas.

Turf Teq

The 1305BC is self-propelled with a hydrostatic transmission, 13 hp Honda engine, variable-angle cutting head and infinitely variable operating speed.

Bandit

The 2450XP offers a 44.2 hp diesel engine, four-wheel drive, flotation tires, 50-inch wide swing arc and optional radio remote control with tether backup.

Bay Engineering

The Stumper 220 provides reliable stump grinding technology in a compact design compatible with standard skid steers and excavators.

CEAttachments

The EDGE Stump Grinder comes in skid steer and three-point mount models, has carbide steel teeth and grinds stumps up to 45 inches in diameter.

Coneqtec/Universal

SC Series stump grinders have a patented offset design that provides better visibility and a hydraulic-controlled, telescoping cutter head arm.

Fecon

The SH700 is diesel-powered and self-contained, with a Sandvik DuradiskII cutting system, direct drive and disc facing the operator for visibility.

FAE

The 300/S soil stabilizer/forestry tiller/stump grinder grinds material up to 20 inches belowground, leaving behind smooth soil. Available in two working widths.

Green Mfg.

Greenteeth stump cutter teeth come in four sizes and can be changed in the field in less than 30 seconds each, with a common wrench.

Hawk Equip.

The Hawk self-propelled unit can grind any stump diameter from a height of 24 inches down to 16 inches below grade. A 30.5-inch wide push model is also available.

JP Carlton

The SP4012 is a four-wheeled, self-propelled unit with a 1-inch thick, 21-inch diameter cutting wheel, variety of engine options and hydraulic steering.

Leonardi

The M1 Silver cutting system has no rights, lefts, straights or pockets, and only one tool is required for changing. Improved chip containment and faster cleanup.

MacKissic

The Mighty Mac stump cutter allows the operator to see where the cutter head is at all times. The braking system stops the cutter head in less than two seconds.

Miller Machine Works

The T140H is an attachment for 140 hp tracked forestry carriers. It features a telescopic extension, Revolution cutter wheel assembly and more.

Morbark

The D52SPH is equipped with a hydrostatic primary drive, 52-inch boom arc swing, available four-wheel drive and 34 hp, liquid-cooled diesel engine.

New River Equip.

The Revolution offers precise alignment of all cutting tools and reduced wheel wear. Available for tow-behind, self-propelled or any stump grinding application.

PowerTek

Push and self-propelled models have an easily adjustable handle, full guards to keep debris under the machine and operator presence switch.

Rayco

The Trac Jr. features rubber tracks, ground pressure of less than 4 PSI, 47-inch cutting width, hydraulic backfill blade and 35 hp Vanguard gas engine.

Ryan’s Equipment

The Predator stump grinder offers a bulldozer-style back blade, optional oil cooler and chip curtains, and a 22.5-inch wheel with 24 standard teeth.

Sneller

Stump Mills are excavator-mounted and self-powered, with 170 or 275 hp Cummins engines. The two-piece wheel design has six replaceable sections.

Top Notch Equip.

The Branch Manager 38 Special is a 38 hp stump grinding attachment for mini loaders, with a 20-inch wheel, 18-inch grinding depth and 46-inch-wide swing.

Toro

The stump grinder attachment for Dingo loaders has a 17-inch cutter wheel with 12 teeth, wheel speed of 2,000 RPM and tooth tip speed of 148 feet per second.

USPraxis

The PRX240 is a 24 hp, self-propelled unit with a 16-inch diameter cutter wheel, patented Quadrublades, hydrostatic transmission and larger tires.

Vermeer

The SC372 features the optional AutoSweep monitoring system, combination belt and gearbox direct-drive system and operator presence system.